It's finally getting colder here in Virginia! I realized I needed some winter neck gear. We have a new yarn from Schoppel called "PUR". It's a worsted weight single that is slightly felted. I've been in love with the colors since it came in, but couldn't think of a project for it. Lo and behold, while going through new patterns, I found the Fancy Neck Cozy by Cabin Fever. The pattern calls for two strands of yarn, a solid and a varigated. Lightbulb moment!
I grabbed a skein of PUR and matched it with a ball of Brown Sheep Yarns Lanaloft in Buoyant Blue. Size 15 needles and I was racing! This is a great little project, would make a great gift. Both yarns were wonderful to work with and I loved the pattern and would make it again. I did make mine 32" instead of the suggested 27" (well, my neck is larger and I was watching a football game and not measuring.....)
The pedestal button is Cracked Coconut from Jul. We also have the silver floral buttons. This is a good project for a large button you may have had your eye on, but couldn't figure out what to use it on.
Wednesday, November 7, 2012
Sunday, October 21, 2012
Finally Finished a Project
Have you ever had a severe case of startitis? This is when you have a number of projects going, should really finish those first, then see new ideas in a shop or on Ravelry.com and just have to start another item!
I apparently suffer from this syndrome. I'm afraid to count the number of things I have that are partially knit or crocheted (and let's not ever start with the fiber and fleeces waiting to be spun). I start each project with the best of intentions, try to set goals to accomplish and wham! look at this great sweater/ shawl/ scarf etc. I can finish that really fast......
Anyway, I finally sat down and finished my Wingspan model for the shop. (I would have been done sooner if those other immediate projects hadn't cropped up...) I really was thrilled with the Zauberball yarn. I enjoyed this project so much that I'm making one for me to wear. Fortunately, it's an easy enough knit that I can do it while watching tv in the evening.
This week we received a new model and pattern designed by Heidi Sunday. It uses one skein of Baby Alpaca Grande Hand Dye and one skein of Baby Alpaca Ultimo from Plymouth and is knit in the round on a US size 11 circular needle.
So, of course, I had to start one.......
I apparently suffer from this syndrome. I'm afraid to count the number of things I have that are partially knit or crocheted (and let's not ever start with the fiber and fleeces waiting to be spun). I start each project with the best of intentions, try to set goals to accomplish and wham! look at this great sweater/ shawl/ scarf etc. I can finish that really fast......
Anyway, I finally sat down and finished my Wingspan model for the shop. (I would have been done sooner if those other immediate projects hadn't cropped up...) I really was thrilled with the Zauberball yarn. I enjoyed this project so much that I'm making one for me to wear. Fortunately, it's an easy enough knit that I can do it while watching tv in the evening.
This week we received a new model and pattern designed by Heidi Sunday. It uses one skein of Baby Alpaca Grande Hand Dye and one skein of Baby Alpaca Ultimo from Plymouth and is knit in the round on a US size 11 circular needle.
So, of course, I had to start one.......
Monday, September 24, 2012
If you've been into the shop lately, you may have noticed we've gotten a number of shipments of new sock yarn (and several more are arriving soon!) Could there be something afoot for the month of October?
Yes it will soon be SOCKTOBER!!! or, Sock Yarn, Not Just for Socks!
Our featured Knit-A-Long for the month of October is the Wingspan. I started the model for this project last week, and I have to say, I can't put it down. Wingspan can be made from sock yarn or instructions are available for worsted weight, but I'm currently using the new Zauberball sock yarn. I don't think I've ever been so entertained by a yarn while knitting.
As soon as I finish this model, I'm planning to make another one in either Zauberball Crazy or the Jawoll Magic Colors. The shawl uses short rows, but if you've ever done them before, there is no wrapping involved. I'm excited to see how the yarn stripes on the rest of the project.
Now, back to the other five models I'm trying to complete......
Yes it will soon be SOCKTOBER!!! or, Sock Yarn, Not Just for Socks!
Our featured Knit-A-Long for the month of October is the Wingspan. I started the model for this project last week, and I have to say, I can't put it down. Wingspan can be made from sock yarn or instructions are available for worsted weight, but I'm currently using the new Zauberball sock yarn. I don't think I've ever been so entertained by a yarn while knitting.
As soon as I finish this model, I'm planning to make another one in either Zauberball Crazy or the Jawoll Magic Colors. The shawl uses short rows, but if you've ever done them before, there is no wrapping involved. I'm excited to see how the yarn stripes on the rest of the project.
Now, back to the other five models I'm trying to complete......
Sunday, September 23, 2012
A Little Dust/Proud Mom/Owner
As I said in my very first post, I recently became the owner of a yarn shop. The previous owners moved into the space about 3 years ago, and while updating a few things and adding carpet, didn't do much redecorating. If you've ever moved into an older house (but new to you), there is always something that will, in time, get on your nerves. (In our 100 year old previous house, it was the pink paint in the bathroom that annoyed me after I became pregnant with my first child, my current house it was the 1970's beige metallic with burnt orange birds-of-paradise wallpaper in the main hall and dining room....)
I bought the shop and unfortunately didn't have the ability to close to revamp. I knew this was going to be a more difficult way to change anything, and when minor rearranging and moving things didn't quite satisfy, I decided I had to start some renovations, all the while staying open for business.
Granted, repainting the restroom a nice cheery shade of yellow to go with the gift of a new rug (thanks Donna!) was a great start. After awhile though, you start to see so many things that need to be changed. I also realized oldest son was close to going back to college, and youngest son would be starting senior year of high school, thus taking away my strong and cheap labor supply (well, maybe not cheap, you have to see my youngest eat....). Middle son must have seen this all coming and wisely hid, uh, stayed in his college town for the summer.
The good thing is that by not starting right away, I learned the flow of the shop and was better able to evaluate what might work. I found a retail fixtures place, grabbed truck and oldest son and went off to buy slatwall. This is an amazing invention, with hooks that slide rather than stay stationary like pegboard. Six sheets and two boxes of 100 hooks later (I can't possibly have more skeins than that?), we set off back to the local home improvement center to get paint, screws and some hanging supplies.
Back at the shop, we had to move yarn to a safe place. That was the easy part. Then came the heavy cabinets that had been useful in the original shop, but now just took up wall space and made it difficult to reach yarn sometimes. Fortunately, oldest and I have learned the easiest way to move these behemoths, so finished this task.
We started using the spackle. Not too difficult, except for the wall with the window. Did I mention it's an interior wall? I think it may have been the quiet room for parents for the former Karate studio. It's now one wall of my office. After concluding that we couldn't remove it and put a huge drywall patch in, we removed part of the outer trim so the slatwall would be flat against the wall and we wouldn't have to mess with 2 x 4's to attach it. I had to fill in the gap between the window and the studs. Luckily, I had a 100yr old house with horsehair plaster walls, so patching for me has become an art form. Painting went well. Now for the fun.
If you've ever watched the DIY channel, you may be familiar with the show "Renovation Realities". This is the part where I thought we would become an episode. Youngest son arrived, and he and oldest started using the laser level and stud finder so we could attach the slatwall. (It's now about 11:00p.m.) Everything appears to be ready to go, height and width marked with tape, studs marked top and bottom, okay! Youngest and I hold panel will oldest mans the drill and starts screwing the panel. Going well, until he tries to insert a screw at the top of the panel where it was marked, and the screw won't bite! After this happening up and down in several places, we conclude that the wall was put up using half studs, so it became a guessing game. Youngest and I were able to finally let go, and panel stayed attached.
I decided to start hanging some skeins while they measured the next wall. The challenge became, where are the electrical wires that attach to this outlet in the wall? Wait, we have to hit the stud next to the door, not the window, it can't hold it..... I'm not a total perfectionist and told them to just make it work, and kept hanging skeins. About 2:00a.m., we finally affixed the panel and started to clean up.
I have to say, I'm very proud of my sons' work. The wall looks wonderful and the yarn really pops now.
Only three more walls to go.........
I bought the shop and unfortunately didn't have the ability to close to revamp. I knew this was going to be a more difficult way to change anything, and when minor rearranging and moving things didn't quite satisfy, I decided I had to start some renovations, all the while staying open for business.
Granted, repainting the restroom a nice cheery shade of yellow to go with the gift of a new rug (thanks Donna!) was a great start. After awhile though, you start to see so many things that need to be changed. I also realized oldest son was close to going back to college, and youngest son would be starting senior year of high school, thus taking away my strong and cheap labor supply (well, maybe not cheap, you have to see my youngest eat....). Middle son must have seen this all coming and wisely hid, uh, stayed in his college town for the summer.
The good thing is that by not starting right away, I learned the flow of the shop and was better able to evaluate what might work. I found a retail fixtures place, grabbed truck and oldest son and went off to buy slatwall. This is an amazing invention, with hooks that slide rather than stay stationary like pegboard. Six sheets and two boxes of 100 hooks later (I can't possibly have more skeins than that?), we set off back to the local home improvement center to get paint, screws and some hanging supplies.
Back at the shop, we had to move yarn to a safe place. That was the easy part. Then came the heavy cabinets that had been useful in the original shop, but now just took up wall space and made it difficult to reach yarn sometimes. Fortunately, oldest and I have learned the easiest way to move these behemoths, so finished this task.
We started using the spackle. Not too difficult, except for the wall with the window. Did I mention it's an interior wall? I think it may have been the quiet room for parents for the former Karate studio. It's now one wall of my office. After concluding that we couldn't remove it and put a huge drywall patch in, we removed part of the outer trim so the slatwall would be flat against the wall and we wouldn't have to mess with 2 x 4's to attach it. I had to fill in the gap between the window and the studs. Luckily, I had a 100yr old house with horsehair plaster walls, so patching for me has become an art form. Painting went well. Now for the fun.
If you've ever watched the DIY channel, you may be familiar with the show "Renovation Realities". This is the part where I thought we would become an episode. Youngest son arrived, and he and oldest started using the laser level and stud finder so we could attach the slatwall. (It's now about 11:00p.m.) Everything appears to be ready to go, height and width marked with tape, studs marked top and bottom, okay! Youngest and I hold panel will oldest mans the drill and starts screwing the panel. Going well, until he tries to insert a screw at the top of the panel where it was marked, and the screw won't bite! After this happening up and down in several places, we conclude that the wall was put up using half studs, so it became a guessing game. Youngest and I were able to finally let go, and panel stayed attached.
I decided to start hanging some skeins while they measured the next wall. The challenge became, where are the electrical wires that attach to this outlet in the wall? Wait, we have to hit the stud next to the door, not the window, it can't hold it..... I'm not a total perfectionist and told them to just make it work, and kept hanging skeins. About 2:00a.m., we finally affixed the panel and started to clean up.
I have to say, I'm very proud of my sons' work. The wall looks wonderful and the yarn really pops now.
Only three more walls to go.........
Sunday, August 12, 2012
A Blog??? Me???
I am the new owner of a shop in Haymarket, VA called Needles in the Haymarket. While trying to update our website, the web guru suggested that I set up a blog for various reasons. My middle son thought this to be very amusing, as he already has a metal music blog, and I am known to be the MOST technologically inept human alive. (Where are those letters and words when I'm playing "Scrabble"?) Anyway, here is my attempt at blogging (I'm sure Will Shakespeare is flipping in his grave over what the English language has become.....)
We just finished up with the End of Summer Sale at the shop. Now it's time to bring out all the NEW FALL YARNS that have been hiding in the boxes for the last week. I think everyone will be able to find a great new project to make.
Speaking of new yarns, I started a new shop model/Christmas present last evening. It's a man's sweater, called "Men's Sailing Sweater" by Claudia Pacheco from the book Adventurous Zealana. I'm using Zealana Heron in Cloud Blue. So far, I'm enjoying knitting with it. When I tell customers we have yarn made with
New Zealand Possum, they think I'm a little crazy, however the NZ Possum looks nothing like the US opposum, and is very, very soft and warm. Will keep updating my sweater progress (as soon as I find my camera....)
Subscribe to:
Posts (Atom)